Speedometer
High speed recall
0-60 MPH time
1/4 mile elapsed time recall
Reads up to 255 MPH
Odometer and trip meter
Calibrate to adjust for different tire sizes, wheel sizes, and gear ratios
Electronic Ford speedometer sender included
 
Built in Tachometer
Equiped with a speedo/tach combination, when in this mode the tachometer will read out in the odometer and sweep while the speedometer reads out in the center
Microprocessor controlled with peak rpm memory recall
reads your RPM in 0-9900 in 100 RPM increments 
Works on 1-2-4-6-8-10-12 cylinder engines
 
*If using with an LS engine you may also need the Intellitronix LS swap kit (8014LS)
 
Fuel 
reads in percentage (empty-full) 0-100% range in 1% increments
Ohm ranges include:
73 - 10 ohm
16 - 158 ohm
Universal 240 - 33 ohm
22 - 145 ohm
 
Voltmeter 
Reads in .1 volt increments from 7.0 to 16.0 volts
No sender needed
 
Oil Pressure 
Reads in 1 PSI increments from 00 to 99 PSI
Comes with S8868 oil pressure sender
 
Water Temperature 
10-355 Fahrenheit degree accuracy.
Sending unit included
 
BEZEL NOT INCLUDED
 
Additional features:
High Beam Indicator
Check Engine Light
Brake Indicator
Turn Signals 
Night time dimming
 
Optional add ons:
 
GPS Speedometer Sending Unit (S9020): Accurate readings with a simple 3-wire hookup. Works with 4000, 8000, or 16000 PPM speedometers. Use to bypass vehicle transmission or computer, picks up speed from satellite signal 
 
Universal Gauge Harness (QCWH20):  8' harness includes color-coded wires, quick-connects for easy removal, and all hardware needed for gauge wiring. Please note this does not plug into the factory harness
 
LS Swap Kit (8014LS): Required for GM LS engines, includes 12mm & 16mm bushings and a 10K-1/2 watt resistor to boost tach signal